RX7/112十進電容箱產品介紹（中英文）
產品概述：
RX7/112十進電容箱是一款高精度可調式電容設備，采用模塊化十進制設計，可實現0.1pF至11.11μF范圍內的電容值精確調節。本產品基于精密機械結構與優質介質材料制造，適用于電子電路調試、教學實驗、科研測量等場景，為電子工程師和科研人員提供靈活可靠的電容調節解決方案。
核心特點：
- 精密調節系統：配備十組獨立調節單元，通過旋轉開關實現電容值的階梯式調整，最小步進精度達0.1pF，滿足高靈敏度電路的測試需求。
- 穩定性設計：采用特殊介質材料和抗氧化金屬組件，在-10℃至+50℃環境下保持電容值穩定，溫漂系數小于50ppm/℃。
- 人性化操作界面：優化布局的刻度盤與清晰的數字標識，配合防滑調節旋鈕，確保操作過程直觀便捷。接線柱采用鍍金工藝處理，有效降低接觸電阻。
- 寬頻段適用性：在20Hz-1MHz頻率范圍內保持線性響應特性，適配多種信號測試場景。全屏蔽結構設計顯著降低雜散電容干擾。
應用領域：
• 電子實驗室：用于濾波器調試、諧振電路匹配、射頻系統校準等
• 教育機構：電子工程專業教學演示、學生實驗課程教具
• 通信設備：基站調測、天線匹配網絡優化
• 工業控制：傳感器電路補償、精密儀器校準
技術參數：
工作電壓：≤500V DC/AC峰值
介質損耗：≤0.002（1kHz）
機械壽命：≥10萬次調節
外形尺寸：280×210×95mm（長×寬×高）
重量：約2.8kg
安全提示：
建議在相對濕度≤80%、無腐蝕性氣體的環境中使用，長期存放時建議定期通電維護。調節過程中應避免超額定電壓使用，建議配合專業測試儀器進行系統聯調。
RX7/112 Decade Capacitance Box Product Introduction
Product Overview:
The RX7/112 Decade Capacitance Box is a precision-adjustable capacitor system featuring modular decimal configuration, offering capacitance adjustment from 0.1pF to 11.11μF. Engineered with high-quality dielectric materials and robust mechanical construction, this device serves as an essential tool for circuit debugging, educational experiments, and scientific research, providing reliable capacitance adjustment capabilities for electronics professionals.
Key Features:
- Stepped Adjustment System: Ten independent decade units enable precise capacitance selection with 0.1pF resolution, ideal for sensitive circuit testing applications.
- Environmental Stability: Specialized dielectric composition and anti-corrosion metal contacts ensure stable performance across -10℃ to +50℃, with temperature coefficient below 50ppm/℃.
- Ergonomic Interface: Gold-plated terminals with anti-skid knobs and clear numerical markings facilitate accurate operation. Low-contact-resistance design enhances measurement reliability.
- Broad Frequency Compatibility: Maintains linear response characteristics from 20Hz to 1MHz. Shielded construction minimizes stray capacitance interference.
Applications:
• Laboratory: Filter tuning, resonant circuit matching, RF system calibration
• Education: Electronics engineering demonstrations, student lab experiments
• Telecommunications: Base station alignment, antenna network optimization
• Industrial: Sensor circuit compensation, precision instrument calibration
Technical Specifications:
Rated Voltage: ≤500V DC/AC peak
Dissipation Factor: ≤0.002 (at 1kHz)
Mechanical Durability: ≥100,000 operations
Dimensions: 280×210×95mm (L×W×H)
Weight: Approx. 2.8kg
Usage Guidance:
Recommended for operation in environments with ≤80% humidity and non-corrosive atmospheres. Periodic maintenance is advised for long-term storage. Always operate within rated voltage limits and integrate with professional measurement systems for optimal performance.
