ZC-23H型沖擊繼電器
ZC-23H型沖擊繼電器產品介紹(中文)
ZC-23H型沖擊繼電器是一種專為直流及三相全波整流操作設計的信號集中控制元件,廣泛應用于電力系統繼電保護及自動化控制回路中。該繼電器采用干簧密封觸點技術,內部集成電容、二極管及濾波元件,確保動作可靠性和抗干擾性能。其核心工作原理是通過微分脈沖變流器(BL)將直流信號回路中的矩形電流脈沖轉換為尖頂脈沖,觸發靈敏元件(GHJ)啟動出口中間繼電器(ZJ),從而驅動電鈴或電笛發出音響信號。繼電器具備自動復歸功能,當信號電流穩定后,執行元件自動復位,僅通過觸點自保持維持輸出狀態。技術參數方面,支持額定電壓DC220V/110V/48V/24V,最小沖擊動作電流不大于0.16A(ZC-23H型),最大穩定電流3.2A,功率消耗低于7W(BL繞組)和10W(ZJ動作時)。產品采用JK-2型殼體,結構緊湊,適用于高密度安裝場景,并可通過兩臺繼電器反串接線實現沖擊自動復歸功能。2821
ZC-23H Impact Relay Product Introduction (English)
The ZC-23H Impact Relay is a centralized signal control component designed for DC and three-phase full-wave rectifier operations, widely used in power system protection and automation control circuits. It features sealed reed contacts with integrated capacitors, diodes, and filters to ensure reliable operation and noise immunity. The relay operates by converting rectangular current pulses in DC signal circuits into sharp peaks via a differential pulse transformer (BL), which activates the sensitive element (GHJ) to trigger the output intermediate relay (ZJ), thereby driving audible alarms like bells or buzzers. It supports auto-reset functionality, where the actuator resets upon signal stabilization while maintaining output through contact self-locking. Key specifications include rated voltages of DC220V/110V/48V/24V, a minimum impact action current of ≤0.16A (ZC-23H model), and a maximum steady-state current of 3.2A, with power consumption below 7W (BL winding) and 10W (ZJ activated). The compact JK-2 housing design suits high-density installations, and dual-relay reverse-series wiring enables automatic impact reset capabilities. 2821
ZC-23H型沖擊繼電器
的詳細介紹
ZC-23H型沖擊繼電器
沖擊繼電器 >> ZC-23H型沖擊繼電器 |
|
 |
|
|