DX-19型信號繼電器
DX-19型信號繼電器產品介紹（中文）
DX-19型閃光信號繼電器是一種專為交直流信號回路設計的控制器件，主要用于電力系統二次回路及工業自動化控制領域。該繼電器采用集成電路與RC電路相結合的設計方案，配合小型中間繼電器等元件構成。當工作線圈接通電源后，觸點能夠周期性接通和斷開，從而驅動受控?zé)艄獍l(fā)出規律性閃光信號，特別適用于需要視覺警示的場合。產品支持直流220V/110V/48V和交流220V/50Hz多種額定電壓規格，動作電壓不超過額定值的80%，閃光頻率可穩定維持在每分鐘40-80次。繼電器采用標準化殼體結構，提供嵌入式后接線、凸出式前后接線三種安裝方式，便于不同場景的集成應用。其觸點系統在250V電壓下可承載0.5A直流或1A交流負載，滿足常規信號回路的控制需求。產品設計注重可靠性，所有導電部件與外殼之間能承受2000V工頻耐壓測試，絕緣電阻不低于300MΩ。典型應用包括電力保護裝置的故障指示、工業控制系統的狀態報警等場景，單臺設備最多可驅動30路LED節能燈組。2511
DX-19 Signal Relay Product Introduction (English)
The DX-19 flashing signal relay is a control device specifically designed for AC/DC signal circuits, widely applied in power system secondary loops and industrial automation. It integrates IC technology with RC circuits and incorporates compact intermediate relay components. Upon energizing the operating coil, the contacts periodically open and close to generate rhythmic flashing light signals, making it ideal for visual alert applications. The product supports multiple rated voltages including DC 220V/110V/48V and AC 220V/50Hz, with actuation voltage not exceeding 80% of rated value and stable flashing frequency maintained at 40-80 cycles per minute. Featuring standardized housing, it offers three installation options: embedded rear-wiring, protruding front-wiring and rear-wiring configurations for flexible integration. The contact system handles 0.5A DC or 1A AC load under 250V, meeting general signal circuit control requirements. Designed for reliability, all conductive parts withstand 2000V power-frequency withstand voltage between components and enclosure, with insulation resistance over 300MΩ. Typical applications include fault indication in protection devices and status alarms in control systems, capable of driving up to 30 LED lamp circuits per unit. 6722
技術特性說明
該繼電器采用模塊化結構設計，工作過程中直流功耗不超過6W，交流功耗低于6VA。內置電容器放電維持機制確保觸點動作一致性，當放電電壓降至返回值3%時自動復位。產品通過優化電磁兼容設計，能有效抑制工業環境中的高頻干擾。機械結構采用防震設計，可承受中等震級的地震波沖擊。外殼防護滿足常規工業環境要求，觸點材料選用銀合金以提升電氣壽命。提供清晰的掉牌指示窗口，便于現場狀態識別。用戶可根據實際需求選擇不同電壓規格，安裝時需確保接線端子極性正確。111821
Technical Specifications
The relay adopts modular design with power consumption below 6W DC/6VA AC. Its capacitor discharge mechanism guarantees contact operation consistency, automatically resetting when discharge voltage drops to 3% return value. Enhanced EMC design effectively suppresses high-frequency interference in industrial environments. The shock-resistant mechanical structure withstands moderate seismic impacts. Enclosure protection meets standard industrial requirements, while silver-alloy contacts improve electrical durability. A visible flag indicator facilitates on-site status identification. Users may select voltage variants according to application needs, with correct terminal polarity required during installation. 192217
DX-19型信號繼電器
的詳細介紹
DX-19型信號繼電器
| 信號閃光繼電器 >> DX-18、19型信號繼電器 |
|
 |
| |
DX-18、19型閃光信號繼電器
1、應用范圍 |
| |
DX-18、19型閃光信號繼電器(以下簡稱繼電器)用于交直流信號回路。當工作線圈電源接通后，觸點可周期性的接通和斷開，使受控的燈光信號發出閃光。DX-19繼電器可接通30路LED型節能燈信號回路。 |
 |
| 2.主要技術數據 |
| |
| ● |
額定值：DC 220V、110V、48V；AC 220V、50Hz； |
| ● |
動作值：不大于80％額定電壓。 |
| ● |
閃光頻率：每分鐘40-80次。 |
| ● |
功率消耗：DX-18直流不大于6W，交流不大于12VA；DX-19直流不大于6W，交流不大于6VA； |
| ● |
介質強度：產品各導電端子連在一起，對外露的非帶電金屬部分或外殼之間，能承受2000V(有效值)50Hz交流電壓歷時1分鐘試驗而無絕緣擊穿或閃絡現象。 |
|
| 3.內部接線 |
| |
 |
| 4.外形及開孔尺寸 |
| |
 |
|
|
|
