供應 二蹤四跡示波器,YB-360 價格
中文介紹
供應二蹤四跡示波器 YB-360,這是一款性能卓越的電子測試儀器,適用于多種電子信號的測量與分析。其具有高靈敏度和高偏轉因數,最高可達 1mV/div,能夠清晰地顯示微弱信號。標尺亮度設計便于在夜間或進行照相時使用,為用戶提供了良好的視覺體驗。YB-360 采用交替擴展功能,常態和擴展的波形能同時顯示,方便用戶對比觀察。其觸發系統具備 INT 觸發功能,無需轉換 CH1、CH2 選擇開關即可得到穩定的觸發,簡化了操作流程。此外,該示波器還配備了 TV 同步功能,選用新的電視觸發電路可以穩定顯示 TV-H 和 TV-V 信號,適用于電視信號的分析。自動聚焦功能可在校正測量過程中自動調整聚焦電平,確保圖像清晰。觸發鎖定功能使觸發電路呈全自動同步狀態,無需人工調節觸發電平,提高了測量的穩定性和可靠性。YB-360 的掃描開關采用進口數字編碼開關,保證了掃描的精確性和穩定性。其垂直系統偏轉系數范圍為 5mV/div-5V/div,頻帶寬度在不同量程下分別可達 DC:0-20MHz -3dB、DC:0-40MHz -3dB、DC:0-60MHz -3dB,能夠滿足多種信號測量需求。水平系統的掃描時間系數為 0.1μs/div-0.2s/div,掃描擴展范圍為 20ns/div-40ms/div。在 X-Y 工作方式中,CH1 為 X 軸,CH2 為 Y 軸,靈敏度和輸入阻抗與 Y 軸一致。Z 軸的輸入阻抗為 33KΩ,最大輸出電壓為 50V(DC+AC 峰值),最大頻率≤1KHz。該示波器的物理特性也十分出色,電源為 AC 220V ±10%,頻率 50Hz±5%,功耗為 35W。外形尺寸為 132H×321W×376D(mm),重量約 7.2kg,便于攜帶和放置。
English Introduction
We are supplying the YB-360 Dual-Trace Four-Channel Oscilloscope, an outstanding electronic testing instrument suitable for measuring and analyzing various electronic signals. It features high sensitivity and a high deflection factor, with a maximum of 1mV/div, allowing for clear display of weak signals. The brightness of the scale is designed for easy use at night or during photography, providing users with a good visual experience. The YB-360 has an alternate expansion function that enables the simultaneous display of normal and expanded waveforms, facilitating comparative observation. Its triggering system is equipped with an INT trigger function, which allows stable triggering without switching the CH1 and CH2 selection switches, simplifying the operation process. In addition, the oscilloscope is equipped with a TV synchronization function. With the new TV triggering circuit, it can stably display TV-H and TV-V signals, making it suitable for TV signal analysis. The automatic focusing function can automatically adjust the focus level during the measurement process to ensure a clear image. The trigger lock function keeps the triggering circuit in a fully automatic synchronization state, eliminating the need for manual adjustment of the trigger level and enhancing the stability and reliability of the measurement. The YB-360 s scan switch uses an imported digital encoder switch, ensuring precise and stable scanning. The deflection coefficient range of its vertical system is 5mV/div-5V/div, and the bandwidth can reach DC:0-20MHz -3dB, DC:0-40MHz -3dB, DC:0-60MHz -3dB under different ranges, meeting the needs of various signal measurements. The horizontal system has a scan time coefficient of 0.1μs/div-0.2s/div and a scan expansion range of 20ns/div-40ms/div. In the X-Y working mode, CH1 is the X-axis and CH2 is the Y-axis, with sensitivity and input impedance consistent with the Y-axis. The input impedance of the Z-axis is 33KΩ, with a maximum output voltage of 50V(DC+AC peak) and a maximum frequency of ≤1KHz. The physical characteristics of the oscilloscope are also excellent, with a power supply of AC 220V ±10%, a frequency of 50Hz±5%, and a power consumption of 35W. The dimensions are 132H×321W×376D(mm), and the weight is approximately 7.2kg, making it convenient to carry and place.
YB360,二蹤四跡示波器
的詳細介紹
YB360,二蹤四跡示波器
靈敏感高,高偏轉因數1mUdiv:
標尺亮度,便于夜間和照相使用:
交替擴展,常態和擴展的波形能同時顯示:
INT觸發,無需轉換CH1、CH2選擇開關即可得到穩定的觸發:
TV同步,選用新的電視觸發電路可以顯示穩定的TV-H和TV-V信號:
自動聚焦,測量過程中聚焦電平可自動校正:
觸發鎖定,觸發電路呈全自動同步狀態,無需人工調節觸發電平:
交替觸發,能同時觀察兩路不相干信號(YB4320C);
掃描開關采用進口數字編碼開關(YB4320C/40C) |
 |
|
|

|
YB4320C
|
YB4340C
|
YB4360
|
垂直
系統
|
偏轉系數
|
5mV/div-5V/div,按1-2-5步進,共10檔,(量程)(1mV/div-1V/div,在×5MAG)
|
頻帶寬度5mV/div
|
DC:0-20MHz -3dB
|
DC:0-40MHz -3dB
|
DC:0-60MHz -3dB
|
AC:10Hz-20MHz -3dB
|
AC:10Hz-7MHz -3dB
|
AC:10Hz-7MHz -3dB
|
擴展頻帶寬度
|
DC:0-7MHz -3dB
|
DC:0-7MHz -3dB
|
DC:0-7MHz -3dB
|
AC:10Hz-7MHz -3dB
|
AC:10Hz-7MHz -3dB
|
AC:10Hz-7MHz -3dB
|
輸入阻抗
|
1MΩ±2%,25pF ±3pF;經探極10MΩ±5%,約17pF
|
大輸入電壓
|
400V(DC+AC峰值)
|
|
|
水平
系統
|
顯示方式
|
×1、×5;×1、×5交替
|
×1、×10;×1、×10交替
|
掃描時間系數
|
0.1μs/div-0.2s/div±3%,按1-2-5步進,共20檔
|
掃描擴展
|
20ns/div-40ms/div
|
10ns-20ms/div
|
交替擴展掃描
|
至多四蹤
|
|
|
觸發
系統
|
觸發源
|
內、CH2、電源、外
|
|
|
極性
|
+、-
|
|
|
觸發方式
|
自動、正常,TV-V、TV-H
|
|
|
X-Y
方式
|
工作方式
|
在X-Y工作方式中,CH1即X軸,CH2即Y軸
|
靈敏度
|
和Y軸一樣
|
|
|
輸入阻抗
|
1MΩ±2%//25pF±3pF
|
|
|
X軸帶寬
|
DC-1MHz
|
|
|
Z軸
|
輸入阻抗
|
33KΩ
|
|
|
大輸出電壓
|
50V(DC+AC峰值),大頻率≤1KHz
|
帶寬
|
DC-1MHz
|
|
|
校準
|
波形
|
方波
|
|
|
頻率
|
1KHz±2%
|
|
|
幅度
|
0.5Vp-p±2%
|
|
|
CH1
輸出
|
輸出電壓
|
小20mV/div
|
|
|
輸出阻抗
|
約50Ω
|
|
|
帶寬
|
50Hz-5MHz
|
|
|
物理
特性
|
電源
|
AC 220V ±10%
|
|
|
頻率
|
50Hz±5%
|
|
|
功耗
|
35W
|
40W
|
外形尺寸及質量
|
132H×321W×376D(mm) 約7.2kg
|
|
|