SU125x700米字型氣缸 中英文產品介紹
【中文版】
SU125x700米字型氣缸是一款專為工業自動化領域設計的高性能線性執行元件，采用創新的米字型導向結構設計，在重載工況下展現卓越的穩定性和運動精度。該產品缸徑125mm、行程700mm，適用于中長行程、高側向負載的直線運動場景，為工程機械、物料搬運設備及自動化生產線提供可靠動力支持。
產品核心設計融合三點技術優勢：其一，米字型四向?qū)ΨQ導軌結構通過多維度受力支撐，有效抑制活塞桿側向偏移，相較傳統單桿氣缸抗彎曲能力提升60%以上；其二，采用整體式高強度鋁合金缸體與精密研磨不銹鋼活塞桿組合，配合雙層密封系統，確保在0.2-1.0MPa工作壓力范圍內長期穩定運行；其三，模塊化端蓋設計支持多種安裝方式，前端蓋預留標準化氣口與傳感器接口，便于與PLC控制系統快速集成。
在極端工況適應性方面，產品通過優化內部流道設計使啟停緩沖更平順，配合特殊表面處理工藝，可在-20℃至80℃環境溫度及輕度粉塵環境中保持穩定性能。關鍵部件采用耐磨復合材料制造，經實驗室模擬測試顯示，在每分鐘10次往復頻率下持續運行2000小時后，關鍵運動部件磨損量仍低于行業平均水平。
本產品可廣泛應用于汽車焊接夾具定位、注塑機頂出裝置、大型閥門驅動等場景，建議用戶根據實際工況選擇適配的潤滑方案，并定期檢查導向結構間隙。為提升使用安全性，建議在系統設計中配置過載保護裝置，并保持氣源干燥度不低于ISO8573-1:2010三級標準。
【English Version】
The SU125x700 Cross-guided Cylinder represents an advanced linear actuator solution engineered for industrial automation systems. Featuring a unique cruciform guidance mechanism, this cylinder delivers enhanced stability and positioning accuracy in heavy-duty applications. With 125mm bore diameter and 700mm stroke length, it is particularly suitable for medium-long stroke operations requiring high lateral load capacity, making it ideal for construction machinery, material handling equipment, and automated production lines.
Three technological innovations define this product: First, the cross-shaped four-way guidance system provides multi-directional force distribution, reducing lateral deflection by over 60% compared to conventional single-rod cylinders. Second, the integrated high-strength aluminum alloy cylinder barrel combines with precision-ground stainless steel piston rod and dual-layer sealing system to ensure reliable operation within 0.2-1.0MPa pressure range. Third, modular end caps accommodate multiple mounting configurations, with pre-machined pneumatic ports and sensor interfaces for seamless PLC system integration.
Proven in demanding environments, the optimized internal flow channels enable smooth start-stop transitions, while specialized surface treatments ensure consistent performance in temperatures ranging from -20℃ to 80℃ and mildly dusty conditions. Laboratory testing demonstrates that critical wear-resistant components exhibit below-average degradation after 2000 hours of continuous operation at 10 cycles per minute.
Typical applications include automotive welding fixture positioning, injection molding ejection mechanisms, and large valve actuation systems. Users are advised to select appropriate lubrication methods based on operational conditions and conduct regular inspection of guidance clearance. For optimal safety, system designers should incorporate overload protection devices and maintain air supply quality meeting ISO8573-1:2010 Class 3 requirements.
【技術參數/Technical Parameters】
- 工作介質：干燥潔凈壓縮空氣/Working medium: Dry filtered air
- 重復定位精度：±0.15mm/Repeat positioning accuracy
- 最大理論出力：12.5kN@0.63MPa/Max thrust
- 緩沖類型：氣墊緩沖/Pneumatic cushioning
- 端口尺寸：G1/2 ISO thread/Port connection
注：本產品規格可能因持續改進而調整，具體參數以實物標識為準。建議與專業技術團隊溝通選型。
Note: Specifications subject to product improvement. Consult technical team for configuration.
