中文介紹： E3K70-DS50P1光電開關是一種角柱型放大器內置式光電開關，其檢測方式為漫反射形。該產品采用直流型電源，PNP輸出，具有常開（NO）功能。其檢測范圍為50cm，精度在±10%之間，能夠檢測透明或不透明的物體。該光電開關的響應時間為1ms，電源電壓范圍為DC12-24V，可在6-36V脈動（P-P）10%以下的條件下工作。其耐電壓能力為AC1000V，50/60Hz，充電部分與外殼間。在環境適應性方面，該產品可在-30至+65℃的溫度范圍內工作，相對濕度為35%-95%。外殼材質為鋁壓鑄ABS，檢測面（透鏡）為PMMA，防護等級達到IP67。

英文 Introduction： The E3K70-DS50P1 photoelectric switch is a corner pillar type photoelectric switch with built-in amplifier. Its detection method is diffuse reflection. This product uses a DC power supply and has a PNP output with normally open (NO) function. The detection range is 50cm with an accuracy of ±10%, and it can detect both transparent and opaque objects. The response time of this photoelectric switch is 1ms, and the power supply voltage range is DC12-24V, which can work under the condition of 6-36V ripple (P-P) 10% or less. Its withstand voltage capability is AC1000V, 50/60Hz, between the charging part and the housing. In terms of environmental adaptability, this product can work in a temperature range of -30 to +65℃, with a relative humidity of 35%-95%. The housing material is die-cast aluminum ABS, and the detection surface (lens) is PMMA, with an IP67 protection rating.