GDK-3-10DN1 光電開關產品介紹（中英文）

一、產品概述
GDK-3-10DN1 是一款采用先進光電傳感技術開發的非接觸式檢測裝置，適用于工業自動化領域的物體位置檢測、計數及安全防護等場景。該產品通過紅外光束的發射與接收實現精準識別，具備良好的抗干擾能力和環境適應性，可滿足多種復雜工況需求。

二、核心特點

1. 高效檢測：內置高靈敏度接收器，支持最大10米的有效檢測距離，響應時間低于1.5毫秒，適用于高速生產線應用。
2. 穩定可靠：采用全封閉金屬外殼結構，具備良好的防塵防水性能，可在-25℃至+55℃溫度范圍內持續穩定工作。
3. 靈活安裝：緊湊型設計（具體尺寸：32×16×40mm）配合多向調節支架，支持水平/垂直多角度安裝。
4. 智能指示：配備雙色LED狀態指示燈，實時反饋設備運行狀態，并內置靈敏度微調旋鈕便于現場調試。

三、技術參數
工作電壓：DC 10-30V ±10%
檢測模式：漫反射型
輸出方式：NPN/PNP雙路信號輸出
消耗電流：＜35mA
外殼材質：鋅合金鍍鎳
連接方式：M12航空插頭

四、應用領域
廣泛應用于包裝機械的物料到位檢測、流水線產品計數、立體倉儲定位控制、印刷設備紙張監控等場景，同時可適配PLC、單片機等主流控制系統。

English Version:

GDK-3-10DN1 Photoelectric Switch Introduction

I. Product Overview
The GDK-3-10DN1 is a non-contact detection device utilizing advanced photoelectric sensing technology, designed for object positioning, counting and safety protection in industrial automation systems. Through precise infrared beam transmission and reception, this sensor demonstrates notable anti-interference capability and environmental adaptability for diverse operational conditions.

II. Key Features

1. High-Speed Detection: Equipped with sensitive receiver achieving up to 10m detection range and <1.5ms response time, suitable for high-speed production lines.
2. Robust Construction: Full-sealed metal housing provides effective protection against dust and water ingress, maintaining stable performance within -25℃ to +55℃.
3. Flexible Mounting: Compact dimensions (32×16×40mm) with multi-directional bracket allows horizontal/vertical installation adjustments.
4. Visual Feedback: Dual-color LED indicator displays operational status, combined with sensitivity adjustment dial for on-site calibration.

III. Technical Specifications
Operating Voltage: DC 10-30V ±10%
Detection Method: Diffuse reflection
Output Configuration: NPN/PNP dual-channel
Current Consumption: <35mA
Housing Material: Nickel-plated zinc alloy
Connection: M12 aviation connector

IV. Application Scenarios
Ideal for packaging machine material detection, conveyor belt product counting, automated warehouse positioning, and printing equipment paper monitoring. Compatible with mainstream control systems including PLCs and microcontrollers.

備注：本介紹基于通用工業傳感器參數編寫，具體應用建議結合實際工況進行選型驗證。產品持續優化升級中，技術參數以實物為準。