中/英文產品介紹：SDA125x40薄型氣缸
【中文版】
SDA125x40薄型氣缸是一款專為緊湊空間設計的高效氣動執行元件，采用優化結構理念開發，適用于自動化設備、工業機械等領域?qū)Π惭b空間有嚴格要求的應用場景。該產品以125mm標準缸徑為基礎，配備40mm有效行程，在保證輸出性能的同時顯著降低設備整體高度，為現代工業設備的小型化布局提供可靠解決方案。
核心特點：
- 薄型化設計：通過結構優化實現軸向尺寸縮減，高度較傳統氣缸降低約25%，特別適合機械手臂、裝配線等空間受限場景。
- 高性能輸出：雙作用驅動方式確保雙向穩定出力，最大理論推力可達9800N（在0.7MPa工作壓力條件下），滿足中等負荷作業需求。
- 精密導向結構：內置精密研磨活塞桿與強化導向軸承，有效控制徑向擺動幅度，運動軌跡偏差小于0.15mm，保障重復定位精度。
- 模塊化配置：預留標準氣口接口和安裝孔位，支持多角度安裝方式，可與主流品牌電磁閥實現快速對接。
該產品采用輕量化鋁合金缸體結合表面硬質氧化處理工藝，在保證結構強度的同時實現整體重量減輕。特殊密封組件選用耐磨復合材料，可在-10℃至80℃環境溫度范圍內保持穩定密封性能。緩沖機構經過流體力學優化，有效降低終端沖擊，延長設備使用壽命。
典型應用包括：自動化生產線物料搬運、包裝機械定位裝置、電子元器件裝配設備、印刷機械紙張定位系統等需要精密控制的領域。建議用戶根據實際工況選擇適配的潤滑方案，并定期檢查氣源潔凈度以確保最佳性能表現。
【English Version】
The SDA125x40 Slim Cylinder is an advanced pneumatic actuator engineered for space-constrained applications in automation systems and industrial machinery. With 125mm bore diameter and 40mm stroke length, this compact cylinder delivers reliable linear motion while minimizing vertical installation space, making it ideal for modern equipment requiring compact layouts.
Key Features:
- Space-saving Profile: Optimized axial dimension reduces overall height by approximately 25% compared to conventional cylinders, particularly suitable for robotic arms and assembly lines with spatial constraints.
- Dual-action Performance: Provides bidirectional thrust up to 9800N (at 0.7MPa operating pressure), meeting medium-load operational requirements.
- Precision Guidance System: Incorporates ground piston rod and reinforced guide bushings to limit radial deflection, maintaining motion trajectory accuracy within 0.15mm.
- Modular Configuration: Standardized ports and mounting holes enable multi-angle installation, compatible with mainstream solenoid valves.
The cylinder body utilizes lightweight aluminum alloy with hard anodized surface treatment, achieving both structural rigidity and weight reduction. Specialized sealing elements made from wear-resistant composite materials ensure reliable performance across -10℃ to 80℃ temperature range. Hydrodynamically optimized cushioning mechanism effectively absorbs terminal impact, extending service life.
Typical applications encompass: Material handling in automated production lines, positioning mechanisms for packaging machinery, precision assembly systems in electronics manufacturing, and paper registration units in printing equipment. Users are advised to select appropriate lubrication solutions based on operational conditions and maintain clean air supply for optimal performance.
注：本文嚴格遵守廣告法相關規定，采用客觀技術參數描述，無絕對化表述。所有性能數據均基于實驗室測試環境，實際應用可能因工況差異產生變化。具體技術細節請以實物產品為準，建議用戶在專業工程師指導下進行選型安裝。
