E3F-5DP3 接近開關產品介紹
E3F-5DP3 型接近開關是一款高性能非接觸式檢測裝置，采用先進的光電傳感技術實現精準目標識別。該產品以緊湊型結構和穩定輸出特性，廣泛應用于工業自動化控制領域，為設備運行提供可靠的檢測解決方案。
技術參數方面，本產品內置高品質紅外光電傳感器，有效檢測距離為5mm，適用于中小型物體的精準定位需求。采用直流10-30V寬電壓供電設計，兼容主流工業控制系統電源配置。輸出模式為NPN常開型，最大負載電流200mA，可直接驅動繼電器、PLC等設備。響應頻率達到1kHz級別，滿足高速生產線場景的快速檢測要求。工作溫度范圍覆蓋-25℃至+55℃，適應多種復雜工況環境。
產品結構采用高強度ABS工程塑料外殼，具備IP67防護等級，有效抵御粉塵侵入和低壓水流的沖擊。前端感應面經過特殊光學處理，有效降低環境雜光干擾，提升檢測穩定性。內置過流保護和反向極性保護電路，確保設備在異常工況下的安全運行。
在應用場景中，E3F-5DP3適用于自動化裝配線的零部件到位檢測、包裝機械的物料計數、物流分揀系統的位置確認等場景。其非接觸式工作原理避免了機械磨損，特別適合需要長期穩定運行的連續生產環境。產品提供LED狀態指示燈，便于現場調試和運行監控。
本產品通過模塊化設計實現即裝即用，配備標準M12螺紋安裝接口，支持水平或垂直方向靈活安裝。電纜出線方式采用抗拉拽設計，標配2米長PVC護套電纜，滿足大多數設備布線需求。經過嚴格的生產測試流程，產品具有優異的抗電磁干擾能力，可在變頻器、電機等強電磁環境穩定工作。
E3F-5DP3 Proximity Switch Product Introduction
The E3F-5DP3 proximity switch is a high-performance non-contact detection device employing advanced photoelectric sensing technology for precise target recognition. With its compact structure and stable output characteristics, this product is widely used in industrial automation control systems, providing reliable detection solutions for equipment operation.
Technically, the device integrates a high-quality infrared photoelectric sensor with an effective detection range of 5mm, suitable for precise positioning of small to medium-sized objects. It operates on a wide DC voltage range of 10-30V, compatible with mainstream industrial control system power supplies. The NPN normally open output configuration supports a maximum load current of 200mA, capable of directly driving relays and PLCs. With a response frequency up to 1kHz level, it meets the rapid detection requirements of high-speed production lines. The operational temperature range spans from -25℃ to +55℃, ensuring adaptability to diverse working environments.
Constructed with durable ABS engineering plastic housing, the product achieves IP67 protection rating, effectively resisting dust ingress and low-pressure water jets. The specially treated optical sensing surface minimizes ambient light interference, enhancing detection stability. Built-in overcurrent protection and reverse polarity protection circuits ensure safe operation under abnormal conditions.
In practical applications, the E3F-5DP3 excels in component positioning verification for automated assembly lines, material counting in packaging machinery, and position confirmation within logistics sorting systems. Its non-contact working principle eliminates mechanical wear, making it ideal for continuous production environments requiring long-term stability. The integrated LED status indicator facilitates on-site debugging and operational monitoring.
Featuring plug-and-play modular design, the switch comes with a standard M12 threaded mounting interface allowing flexible horizontal or vertical installation. The strain-relief cable outlet design incorporates a 2-meter PVC-sheathed cable, meeting typical equipment wiring requirements. Through rigorous production testing procedures, the product demonstrates excellent electromagnetic interference resistance, maintaining stable performance in environments with strong electromagnetic sources such as frequency converters and motors.
