以下是臺灣泰仕TES32電池測試儀TES-32的產品中英文介紹：

臺灣泰仕TES32電池測試儀是一款功能豐富的電池檢測設備，能夠同時測量電池的內電阻和電壓。它可測量使用中的電池，無需將電池關機，適用于多種類型的電池，包括充電式電池、堿性電池及鉛酸電池。其電池容量測量范圍為0到500安培小時，電阻值測量范圍涵蓋40mΩ、400mΩ、4Ω、40Ω等多個檔位，分辨率分別為10μΩ、100μΩ、1mΩ、10mΩ，準確性為±(1%reading + 8位)。電壓值測量范圍為4V和40V兩個檔位，分辨率分別為1mV和10mV，準確性為±(0.1%rdg±6位)。此外，該設備還具備比較器設定功能，可對電阻值及電壓值上下限進行設定，最多可設定99筆參數。它能提供電池狀態指示，顯示PASS、WARNING、FAIL三種狀態，方便用戶快速了解電池狀況。TES32還具有資料儲存及讀取功能，可手動儲存500筆數據，自動連續記錄9600筆數據，并通過RS-232接口與計算機聯機，便于數據管理和分析。其操作環境為0℃到40℃，濕度不超過80%RH，最大輸入電壓為50VDC。設備采用6只堿性電池或交流轉換器供電，電池壽命約為7小時。TES32的重量約為500g（含電池），尺寸約為250（長）×100（寬）×45（厚）mm，攜帶方便。附件包括說明書、電池、測試棒、RS-232接口及軟件。

The Taiwan TES TES32 battery tester is a feature-rich battery detection device that can measure both the internal resistance and voltage of batteries simultaneously. It is capable of measuring batteries in use without the need to shut them down, and it is applicable to various types of batteries, including rechargeable batteries, alkaline batteries, and lead-acid batteries. The battery capacity measurement range is from 0 to 500 ampere-hours. The resistance value measurement covers multiple ranges of 40mΩ, 400mΩ, 4Ω, and 40Ω, with resolutions of 10μΩ, 100μΩ, 1mΩ, and 10mΩ respectively, and an accuracy of ±(1%reading + 8 digits). The voltage value measurement ranges are 4V and 40V, with resolutions of 1mV and 10mV respectively, and an accuracy of ±(0.1%rdg±6 digits). In addition, the device is equipped with a comparator setting function, which allows for the setting of upper and lower limits for resistance and voltage values, with up to 99 parameters that can be set. It provides battery status indication, displaying three states: PASS, WARNING, and FAIL, enabling users to quickly understand the condition of the battery. The TES32 also features data storage and retrieval functions, capable of manually storing 500 data points and automatically continuously recording 9600 data points. It can be connected to a computer via an RS-232 interface, facilitating data management and analysis. The operating environment is between 0℃ and 40℃, with a humidity level not exceeding 80%RH, and the maximum input voltage is 50VDC. The device is powered by six alkaline batteries or an AC adapter, with a battery life of approximately 7 hours. The TES32 weighs about 500g (including batteries) and has dimensions of approximately 250mm (length) × 100mm (width) × 45mm (thickness), making it convenient to carry. Accessories include a manual, batteries, test leads, an RS-232 interface, and software.