TDA-10x125雙桿氣缸產品介紹
一、產品概述
TDA-10x125雙桿氣缸是一款專為工業自動化領域設計的精密執行元件，采用雙活塞桿對稱結構，在保證穩定輸出的同時提升機械結構的平衡性。缸徑10mm，行程125mm，兼顧緊湊體積與有效工作范圍，適用于對空間布局和運動精度有較高要求的應用場景。產品經過精密加工和嚴格測試，展現可靠的線性運動性能。
二、結構設計特點
-
雙向對稱結構
采用雙活塞桿同步驅動設計，有效抵消單側受力產生的偏載力矩，確保活塞運動軌跡的直線精度。獨特的導向機構設計使兩活塞桿保持平行運動，降低運行過程中的摩擦損耗。
-
模塊化安裝系統
配置標準化安裝孔位和接口尺寸，支持前法蘭、后法蘭、中間支架等多種安裝方式。桿端提供內外螺紋可選配置，便于與各類機械結構快速連接，顯著縮短設備裝配時間。
-
環境適應能力
缸體采用高強度鋁合金精密鑄造，表面經過硬質陽極氧化處理，耐腐蝕性能提升60%�；钊芊饨M件選用進口高分子材料，可在-20℃至80℃環境溫度下穩定工作，滿足常規工業環境需求。
三、性能優勢
• 運動穩定性：雙桿結構使輸出力均勻分布，振動幅度降低45%
• 定位精度：重復定位誤差≤±0.1mm，適用于精密裝配場景
• 速度調節：支持無級調速功能，工作速度范圍50-800mm/s
• 使用壽命：經過50萬次滿負荷測試仍保持密封性能完好
四、典型應用領域
本產品廣泛應用于自動化生產線中的定位夾持機構、精密檢測設備的移動平臺、包裝機械的物料推送裝置、電子元件的裝配治具等場景。特別適用于需要雙向等速運動或對稱施力的工況，如：
- 精密模具的同步開合控制
- 物料分選機構的雙向推送
- 檢測設備的雙軸定位平臺
- 自動化焊接夾具的平衡施壓
五、選型建議
建議根據實際負載重量選擇相應型號，推薦垂直使用時負載不超過2.5kg，水平使用不超過5kg。對于高頻次使用場景（＞30次/分鐘），建議配置速度控制閥以延長使用壽命。提供多種緩沖調節方案，可根據終端沖擊要求選擇橡膠緩沖或液壓緩沖配置。
TDA-10x125 Dual-Rod Cylinder Product Introduction
I. Product Overview
The TDA-10x125 dual-rod cylinder is a precision actuator engineered for industrial automation systems. Featuring symmetrical dual-piston rod construction, this cylinder delivers balanced force transmission while maintaining compact dimensions (10mm bore, 125mm stroke). Its space-efficient design combines precise linear motion capabilities with enhanced structural stability, making it ideal for applications requiring accurate positioning and repeatable performance.
II. Structural Features
-
Bilateral Symmetry Design
Dual piston rods operate in perfect synchronization, effectively neutralizing lateral torque during operation. Precision-guided rod alignment minimizes friction loss and ensures straight-line motion accuracy throughout the stroke.
-
Modular Configuration
Standardized mounting interfaces support multiple installation configurations including front flange, rear flange, and center mounting. Adjustable rod ends with internal/external thread options enable quick integration with mechanical systems, reducing equipment assembly time by 30%.
-
Environmental Durability
Aircraft-grade aluminum alloy body with hard anodized surface treatment improves corrosion resistance by 60%. High-performance polymer seals maintain optimal performance across -20℃ to 80℃ operating temperatures, suitable for most industrial environments.
III. Performance Advantages
• Motion stability: Dual-rod design reduces vibration amplitude by 45%
• Positioning accuracy: Repeat positioning error ≤±0.1mm
• Speed control: Adjustable speed range 50-800mm/s
• Service life: Maintains seal integrity after 500,000 full-load cycles
IV. Typical Applications
This product excels in automated positioning clamps, precision measuring equipment, packaging machine pushers, and electronic component assembly systems. Particularly effective in applications requiring:
- Synchronized mold opening/closing
- Bidirectional material sorting
- Dual-axis inspection platforms
- Balanced pressure welding fixtures
V. Selection Guidance
Recommended payload capacity: ≤2.5kg vertical / ≤5kg horizontal. For high-frequency applications (>30 cycles/min), speed control valves are suggested to extend service life. Multiple cushioning options available including rubber buffers and adjustable hydraulic dampers for impact-sensitive operations.
